全站搜索
新闻动态
联系方式
地  址:济南市天桥区标山南路12号
电  话:0531-80665519
        13075306693
传  真:0531-80665519
邮  箱:jnjsmrd@163.com

淋膜无纺布袋的制作流程


来源:本站 作者:jnjs 日期:2015/10/28 14:43:51 浏览次数:100

淋膜无纺布袋的制作流程如下:
Film non-woven bag production process is as follows:
一、制版:由于淋膜无纺布袋是要把图案印在膜上,因此首先要制作凹版。制版的费用比起其它的印刷方式要高许多,这也就限制了一些小批量的袋子不适合做淋膜无纺布袋。
A, plate-making: as the film non-woven bag is to print the pattern on the membrane, so the first thing to make gravure. Plate making cost is much higher than other printing methods, it also limits the small bulk bag is not suitable for film non-woven bags.
版费一般在0.1元/平方厘米。超过一米的板而且每色还要另外每色加200元,超大板胶棍需要另外加工。
Version is in commonly 0.1 yuan per square centimeter. More than one meter of the plate and each color another $200 per color and even, large plate rubber roller need additional processing.
二、印刷:淋膜无纺布袋需要把图案印在膜上。印刷一般采用六色机或十色机印刷。膜一般有亮光膜亚光膜,亚光膜比亮光膜要稍微贵点。
Printing: film non-woven bags need to print the pattern on the membrane. Six commonly used printing color printing machine or ten color machine. There's a light at the end of the film in general film matte film, matt membrane is slightly more expensive than the light membrane.
三、淋膜:膜印好之后,接就就是要把膜复到无纺布上。淋膜机就是在膜跟无纺布之间淋上高温膜冷却后无纺布跟膜就粘为一体。这样带有彩色图案的无纺布面料就大功告成了。
Three, drench film: film printing, meet you is to put the membrane complex on non-woven fabric. Laminating machine is between the membrane and non-woven tube on non-woven fabric after high temperature film cooling with film as a whole. This non-woven fabric with a color pattern're done.
本文由山东无纺布袋友情奉献.更多有关的知识请点击:http://www.jnjswfbd.com/我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

上一条新闻:复膜无纺布袋的制作方法及其特点   下一条新闻:定制无纺布袋的注意事项