全站搜索
新闻动态
联系方式
地  址:济南市天桥区标山南路12号
电  话:0531-80665519
        13075306693
传  真:0531-80665519
邮  箱:jnjsmrd@163.com

聚四氟乙烯纤维不能制作淋膜无纺布的原因


来源:本站 作者:jnjs 日期:2016/3/21 18:20:39 浏览次数:100

首先,聚四氟乙烯在制作淋膜无纺布以后,它的摩擦因数很小,纤维基本没有可用卷曲,很难产生纤维与纤维之间的搭接,即使梳理出了毛网也往往很难进一步将毛网输送到交叉铺网机以及在交叉铺网机中顺利折叠成网.
First, PTFE in making non-woven Lin Mo after, its friction coefficient is very small, fiber almost has no available curl, it is difficult to produce the overlapping between the fiber and the fiber, even to tease out the hair net also tend to it is difficult to further hair net transported to cross lapping machine and in Cross shop network machine smooth folding into the net.
其次,在制成淋膜无纺布以后,它很容易在纤维输送,梳理过程中产生静电,导致无法连续生产.
Secondly, after the film made of non-woven fabrics, it is very easy in the fiber transmission, the static electricity generated in the process of combing, leading to continuous production.
总体而言,由于淋膜无纺布的特殊性,所以,在生产的过程中对原材料的选择是非常严格的.选用聚四氟乙烯纤维会对生产和使用造成影响,不建议选用.
Overall, due to the particularity of laminating non-woven fabric, so in the production process of raw material choice is very strict. Selection of polytetrafluoroethylene fiber will cause the influence to the production and operation, not recommended for use.
本文来自:山东无纺布袋详情请点击:http://www.jnjswfbd.com
This article from: Shandong non-woven bag details, please click: http://www.jnjswfbd.com

上一条新闻:介绍无纺布袋的丝网印刷工艺   下一条新闻:今时无纺布袋厂介绍无纺布袋的三大优势