全站搜索
新闻动态
联系方式
地  址:济南市天桥区标山南路12号
电  话:0531-80665519
        13075306693
传  真:0531-80665519
邮  箱:jnjsmrd@163.com

无纺布袋的设计制作要确定的事项


来源:http://www.jnjswfbd.com 作者:http://www.jnjswfbd.com 日期:2018/4/26 13:46:12 浏览次数:100

一、手提袋尺寸的确定
1. Determination of the size of a handbag
首先要确定手提袋的外观、大小,而手提袋的容积规格与实际容纳的体积紧密相关,太大则浪费纸张材料,太小不便于装,也不好取。手提袋外观尺寸确定后,就开始画刀版图纸了。
First of all, we must determine the appearance and size of the handbag, and the volume of the handbag is closely related to the actual volume, too big to waste paper material, too small to be easy to install, and not to take. When the size of the handbag is determined, the knife plate will be started.
二、刀版图纸的绘制
Two. Drawing of the drawing of the knife
手提袋刀版图纸可以在CAD软件绘图,也可以在AI、FH、CD等软件内绘制。根据设计制作人员的特长而定,绘图顺序是先画大面,再画粘口及其他折痕部位,然后调整细节,最后检查标注尺寸。
The handbag version can be drawn in CAD software or in software such as AI, FH and CD. According to the specialty of the design and production personnel, the drawing order is to draw the large surface first, then draw the sticky and other creases, then adjust the details, and finally check the dimensioning size.

无纺布袋定做三、外观的设计与工艺制定
Three, design and process of appearance
1、外观设定一般要与所装物体的色彩、风格保持一致,最好能体现行业特性。
1, the appearance should generally be consistent with the color and style of the object, so it is best to reflect the characteristics of the industry.
2、正反面设计主要图文在折痕处要避开。侧面几个折痕线交在一起的部位,最好不要有图文,否则,折痕对其很有影响。就像设计烟包要避开反面折痕一样。
2, design the main and negative text to avoid the creases. On the side of the crease lines, it is best not to have pictures or texts, otherwise, creases will have an impact on them. It's like designing a cigarette bag to avoid the reverse creases.
3、手提袋纸张与内面的包装材料纸如果不一致,则在外观上要尽量接近。
3. If the paper of the handbag paper and the inner surface are inconsistent, the appearance should be as close as possible.
4、覆膜要平整,尤其是覆光膜,胶水涂布不均匀,很容易花。
4, laminating should be smooth, especially film covering, uneven coating of glue, easy to spend.

上一条新闻:无纺布袋上的图案是怎么制作上来的?   下一条新闻:手提袋制作黄色怎么设计才会更靓丽?