全站搜索
新闻动态

无纺布凹印时呈现粘页的原因


来源:本站 作者:jnjs 日期:2021/4/15 14:20:19 浏览次数:100

收卷后的墨膜a附于原膜的后面,发生这种现象的原因有:在印刷历程中油M的用量过大;油墨的干燥速度太慢;收卷时的张力过大;油墨自身的a协力不足,无纺布袋定做厂家下面为您介绍凹印时呈现粘页现象的原因
The ink film a attached to the back of the original film after rewinding. The reasons for this phenomenon are: too much oil m used in the printing process; too slow drying speed of ink; too large tension during rewinding; insufficient a cooperation of ink itself, and customized non-woven bag. The manufacturer will introduce the causes of page sticking in gravure printing
无纺布凹印时呈现粘页的原因
Causes of sticking pages in non-woven gravure printing
当凹印墨中溶剂极性较强时,与水有较好的亲和性,在相对湿度较高的季节,溶剂能大量吸收空气中水分,且极性酸胺基团也有必然的亲水性,随时间推移印墨中水量增多,再加上气温高,聚酞胺分子降解,更易引起粘页。
When the polarity of the solvent in gravure ink is strong, it has good affinity with water. In the season of high relative humidity, the solvent can absorb a lot of water in the air, and the polar acid amine group also has certain hydrophilicity. With the passage of time, the increase of water in gravure ink, coupled with high temperature, the degradation of poly (phthalamide) molecules, it is easier to cause page sticking.

解决的要领有:适当调解着墨量;适当提高烘箱于燥温度(但不行过高,不然会导致墨膜的外貌层迅速干燥,而吊膜内部没有干燥反而更容易呈现粘连现象);适当降低收卷张力;印刷半制品宜竖放不宜平放;有金属粉的墨(如金色墨、银色墨)因自身的a协力较弱。
The main solutions are: adjust the amount of ink properly; increase the drying temperature of the oven properly (but not too high, otherwise the appearance layer of the ink film will dry quickly, but the inner part of the hanging film is not dry, which is more likely to show adhesion); reduce the winding tension properly; print semi-finished products should be placed vertically rather than horizontally; the ink with metal powder (such as gold ink and silver ink) is weak due to its own characteristics.
有时会因

[1] [2]  下一页


上一条新闻:帆布袋与无纺布袋的区别是什么?   下一条新闻:无纺布袋硬料与软料有什么区别?